x-metalworks  
  x-metalworks.com  
 
malone3
 

Scupper Installation Instructions

 
  1. Use a 2- 3/4 hole saw for the back & a 2- 3/8 hole saw for inside the haul.

  2. Drill out the two holes.

  3. Using the pvc pipe with the serrated end cut out the foam between the two holes.

  4. Once you get the pvc pipe in all the way mark it and cut off the serrated end so its flush with the inside of the haul.

  5. Seal both ends and seal the scupper flange down.
 
scupper install scupper install 2
   
scupper install 4 scupper install3
 
CUSTOM BUILT
 
c 2004 XmetalWorks.com (727) 442-7700