Foothold Instructions

1. Use tape across the tray to help position your cutouts in the same spot on both sides.

2. Trace template with a marker.

3. Make your cuts and watch out for the exhaust tube on right side. Pry off the fiberglass with a screwdriver.

4. Remove foam and use a grinding tool to help shape the foam to conform to the backside of the foothold. 

5. Use rivets, along with epoxy resin mixed with 404 and/or milled fibers to attach holds. Sand the surface thoroughly around the cutout edges so the fiberglass will properly adhere.

6. After holds are in grind the edges a bit along with the rivet heads in preparation for fiberglass strips.

7. Cut strips of fiberglass cloth to lay over the edges of holds.  2 layers of 10 oz will work well. 

8. Mix up epoxy resin and lay glass cloth. Don't wait for the first layer to setup before applying second layer, do both at same time.